On a single-line set Lift receiver and dial 116. Call is immediately on your line. On a business set Lift receiver and press Call Pickup button. Call is immediately on your line.
0.00 - 05/23/2012 - Similar Articles

On a single-line set Lift receiver, press # button, and dial intercom number. Hear ringing and wait for party to answer. NOTE: Single line sets cannot access group intercom if their line also appears on a business set. On a business set Press Group Intercom button and dial intercom number. Hear...
0.00 - 05/23/2012 - Similar Articles

While on a call, one can place the call on hold for retrieval at another telephone. On a single-line set To establish call park: While call to be held is active, press Link/Switchhook. Listen for dial tone. Dial 134 and listen for confirmation tone. Call will be placed on system hold. Hang...
0.00 - 05/23/2012 - Similar Articles

On a single-line set Press Link/Switchhook button and listen for dial tone. Dial 115 and listen for dial tone. Lay receiver down on desk or make another call. To return to first call, hang up. When telephone rings, answer and resume conversation. NOTE: To alternate between calls, press...
0.00 - 05/23/2012 - Similar Articles

Lift receiver and press ##. Call will connect immediately.
0.00 - 05/18/2012 - Similar Articles

One can set up a conference call with up to six people without operator assistance. On a single-line set (by code) To activate: Lift receiver and dial 130. Wait for confirmation tone. Dial number of first conferee. When party answers, press Link/Switchhook button and dial 130. To add additional...
0.00 - 03/12/2013 - Similar Articles

3-Way calling is a free conferencing service available on established WSU phone lines. On a single-line set Press Link/Switchhook button. Listen for dial tone. Dial five digit extension of third party or, if outside the University phone system, dial 9 and the seven or eleven digit number. When...
0.00 - 11/15/2012 - Similar Articles

On a single-line set (by code) To activate call forwarding: Lift receiver and dial 118. Wait for confirmation tone. Dial number to which calls will be forwarded, wait for confirmation tone, then hang up. To cancel: Lift receiver and dial 119. Wait for confirmation tone. Hang up. On a business...
0.00 - 03/12/2013 - Similar Articles

One can set the phone to ring when a previously called busy station becomes free. On a single-line set When you hear the busy tone, press Link/Switchhook button and dial 138, then hang up. When you and the busy party are both available, you will hear three rings. Lift receiver and hear ringing,...
0.00 - 05/23/2012 - Similar Articles

Note: Follow the complete procedure for each speed call number; whether you are using a short or long list of numbers that are programmed and used by one person, or a list of 30, 50, or 70 codes that are programmed by a group controller and accessed by a number of users. On a single-line set (by...
0.00 - 04/29/2013 - Similar Articles

First Steps Look up the number of the University employee or department to whom you're transferring the call. Inform calling party that you are transferring the call to another telephone line (for example, "I am transferring your call to...") and then say the full university telephone number. ...
0.00 - 04/29/2013 - Similar Articles

Call waiting alerts you to an incoming call while you're talking on the telephone. On a single-line set At signal, press Link/Switchhook button and dial 115. The second call will be on your line and the first call will be on hold. To alternate between calls, press Link/Switchhook and dial 115...
0.00 - 05/23/2012 - Similar Articles